2 Ram Set up. (Full Version)

All Forums >> [Performance and Suspension] >> Hydraulics



Message

SirWeezle -> 2 Ram Set up. (1/7/2005 9:30:22 PM)

I came up with a way to lower the front end on my 4wd blazer. I was wondering what all I need for a 2 ram setup. I need like 2 rams with a 6 inch extension. and I can get hoses. I just need to know what all I need for the rams and switches. I am gonna use a power steering pump for my hydraulic pump. any help is appreciated.



volv_lo -> RE: 2 Ram Set up. (7/31/2006 10:20:07 AM)

If you're going to use a POWER STEERING PUMP then all you need is a larger reservoir and a few dumps and a couple fittings.  I know a guy who used manual valves.  WORKED, but VERY SLOOOOWWWWWWW


If you got some #6 hoses, 1 gate pump and 1 dump, 2 deep cycle batteries (24volts) and a #6 marzocchi pump head plus your cylinders you'd be a lot happier.



Page: [1]



Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 Unicode

0.015