2 Ram Set up.

Start Here	My Forums	What's Happening
Login Log Out Register Help/FAQ Home	Inbox My Profile My Forums My Subscription Address Book	Today's Posts Active Topics Posts Since Last Visit Member List

LRH Marketplace

Browse our products:	Shop the Tire Rack:
Other recommended shops: Performance Products®, JCWhitney.com

2 Ram Set up.

Logged in as: Guest

Users viewing this topic: none

Printable Version

All Forums >> [Performance and Suspension] >> Hydraulics >> 2 Ram Set up.

Page: [1]

Message

<< Older Topic Newer Topic >>

2 Ram Set up. - 1/7/2005 9:30:22 PM

SirWeezle

Posts: 1
Score: 0
Joined: 1/7/2005
Status: offline

I came up with a way to lower the front end on my 4wd blazer. I was wondering what all I need for a 2 ram setup. I need like 2 rams with a 6 inch extension. and I can get hoses. I just need to know what all I need for the rams and switches. I am gonna use a power steering pump for my hydraulic pump. any help is appreciated.

Post #: 1

RE: 2 Ram Set up. - 7/31/2006 10:20:07 AM

volv_lo

Posts: 15
Score: 0
Joined: 2/16/2005
Status: offline

If you're going to use a POWER STEERING PUMP then all you need is a larger reservoir and a few dumps and a couple fittings. I know a guy who used manual valves. WORKED, but VERY SLOOOOWWWWWWW

If you got some #6 hoses, 1 gate pump and 1 dump, 2 deep cycle batteries (24volts) and a #6 marzocchi pump head plus your cylinders you'd be a lot happier.

(in reply to SirWeezle)

Post #: 2