Nitrogen or C02

Start Here	My Forums	What's Happening
Login Log Out Register Help/FAQ Home	Inbox My Profile My Forums My Subscription Address Book	Today's Posts Active Topics Posts Since Last Visit Member List

LRH Marketplace

Browse our products:	Shop the Tire Rack:
Other recommended shops: Performance Products®, JCWhitney.com

Nitrogen or C02

Logged in as: Guest

Users viewing this topic: none

Printable Version

All Forums >> [Performance and Suspension] >> Air Suspension >> Nitrogen or C02

Page: [1]

Message

<< Older Topic Newer Topic >>

Nitrogen or C02 - 7/7/2002 6:45:00 PM

slammed F 150

Posts: 4
Score: 0
Joined: 7/7/2002
Status: offline

I have a 94 F 150 with air bags,it has a 10 switch setup with the mac valves running 1/2 inch air line and 2600# bags all the way around.I am wanting to go with nitrogen or c02 to get the compressor out of the setup and always have the air on demand{cause that little 1/4 horse compressor really sucks}any info on doing this setup would be great thanks.

Post #: 1

RE: Nitrogen or C02 - 7/7/2002 10:39:00 PM

buffmatt

Posts: 21
Score: 0
Joined: 7/4/2002
Status: offline

With nitrogen and CO2 there is alot more pressure than just air ,so before doing anything I would check if your lines ,valves,and pressure switch can even withstand the force.

(in reply to slammed F 150)

Post #: 2

RE: Nitrogen or C02 - 7/8/2002 12:36:00 AM

slammed F 150

Posts: 4
Score: 0
Joined: 7/7/2002
Status: offline

i realize there will be alot more pressure,it will probably be a 80 cf cylinder running approx 2000 psi with a regulator on it to bring it down to what the setup can handle 135 to 150 psi,i was wanting to know if anybody on here or anybody you know had performed this and how it worked out.i've seen this on a couple rides at shows but dont know anybody who has done it

(in reply to slammed F 150)

Post #: 3

RE: Nitrogen or C02 - 7/8/2002 9:34:00 PM

Donjuanfuton

Posts: 54
Score: 0
Joined: 7/3/2002
Status: offline

It's possible, no doubt about it. And I'm not trying to sway you from the idea. But have you ever considered more compressors or bigger compressors?

(in reply to slammed F 150)

Post #: 4