air suspension help and shiot!!!!! (Full Version)

All Forums >> [Performance and Suspension] >> Air Suspension

Message

---

ska8boy15 -> air suspension help and shiot!!!!! (11/14/2002 7:37:00 PM) I want to get my truck just really low, not hoppin' so i want a manual valve air system. where can i find them???? also, how much should i lowwer my truck before baggin it and body droppin it? it's a 93' chevy 1/2 ton single cab. please help!!!

---

Donjuanfuton -> RE: air suspension help and shiot!!!!! (11/16/2002 12:19:00 PM) You can find manuals just about anywhere man. Just depends on what you want with it. I strongly suggest master image customs. They're air equipment is the best on the market in my opinion. As far as what you'll need with the bags, up front I'd run drop spindles. And out back you can either run a flip kit or I'd run a 4-link. Like I said, it's just what you want. And on the body drop, figure that out after you've made all you're other modifications. It should most likely be somewhere around 3"

---

drag_it -> RE: air suspension help and shiot!!!!! (12/2/2002 5:54:00 PM) To lay frame you will need, Bags or droz, 2" spindles up front, 4" block and monoleaf out back, or 4 link. You will need a notch in the back also. To lay rockers or pinch You should be laying frame first and then body drop it about 3.5-4.5". You dont need the front coil springs when you bag it because that is what the bag replaces. IF you want some prices, hit me up I can get fastbag kits damn cheap with the top of the line products, it wont hop but it will be fast, manual valves are too slow. Peace

---

Page: [1]

Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 Unicode

0.016