|
Pushrod -> Droppin it (11/29/2002 7:44:00 PM)
|
A few years ago me and my buddy dropped a full size 76 Chevy van. We flipped the rear axle and notched the frame to do the rear. We cut the springs in the front and had to grind the upper control arm shafts to achieve proper alignment...That van is long gone now and I've got an 85 Chevy short fullsize cargo. Almost same proceedures will need to be taken for the rear. We're trying to find out if truck spindles are the same as the van so we won't have to cut the spring as much as we did the last one. Belltech and other companies don't know if they are the same since they never researched the fullsize van. Any info or crossreference sites would be really helpfull..Thanks
|
|
|
|